• Grinder must be inspected before each use
• The grinder must be double insulated or have a third prong on the plug
• The guards and handles must be in place
• an approved backing plate must be used
• The cord must be undamaged and free of defect
• the disc must be rated for the tool – Max safe operating speed of the disc must be greater than or equal to the maximum speed of the Grinder shaft RPM
• The disc must not have signs of cracks or damage
• You must never operate a grinder with one hand.
• Guards must never be modified or removed

These are summaries of selected work-related incidents recently reported to Alberta OHS. They may help you prevent similar incidents. The summaries are based on information obtained as soon as possible after the incident. They are preliminary and subject to change. Because they are being investigated by the employers involved, no additional information is available at this time.

A worker was assembling a scaffold. While moving across sections of the erected scaffold the worker slipped and fell approximately 4.3 m. The worker was wearing fall protection equipment at the time but was not tied off. The worker underwent surgery at the local hospital. Construction and Construction Trades

A worker was operating an overhead crane with a wireless remote, moving steel joists. The worker pushed a wrong button on the remote. This caused the load to swing, crushing the worker’s right forearm against a post. The worker was taken to the hospital for surgery. Manufacturing and Processing

A worker was attempting to clean an ice block out of an auger on an ice re-surfacing machine. The worker’s left hand got caught in the moving auger. The worker suffered numerous broken bones and partial amputation of the index finger on that hand. Public Administration, Education and Health Services

• A mechanic had difficulty removing a ball joint on a vehicle. The mechanic held a ballpeen hammer on top of the ball joint and another worker struck the hammer with a sledgehammer. A small metal fragment was knocked off the head of the sledgehammer and entered the mechanic’s chest, causing internal injuries. The metal fragment was removed during surgery. Retail and Wholesale Trade

 

 

Sask- Neighbour went to go help a senior neighbour start furnace during a cold snap. Truck broke down and she walked to neighbours house. Had two sets of gloves on

One week Later

 

 

Source:

Work Safe Alberta

https://work.alberta.ca/documents/WHS-PUB_GS006.pdf

A new Year brings a time for reflection and time to reassess.

What will your New years safety Resolution be?
We all take risks and shortcuts everyday that become a habit.
Make a commitment by sharing your resolution!